Simonis article

The 32% Nobody Budgets: What Headset-Only VR Purchases Actually Cost

A procurement manager's breakdown of the real cost gap between VR headset-only SKUs and full kits — storage card speed, accessory creep, and the three checks that prevent $1,000 rework.

Buying the headset-only SKU instead of the full kit saved us roughly $600 a unit. It still cost us $1,100 in the first quarter. That's after two replacement base stations, one controller bricked by a firmware update, and a 14-hour round trip to a site that couldn't run the demo. The headset-only decision was right. The way we executed it was not.

I manage the hardware budget for a 240-person training company. We run 22 headsets across four sites, plus a traveling demo kit that follows the sales team wherever they go. In 2024 I spent about $187,000 on VR hardware, accessories, and replacement parts. Before that I bought AV equipment for six years, which means I already knew how to read a spec sheet and still get surprised by the invoice.

The short version, if you are signing a VR purchase order this quarter: budget accessories at 25 to 35 percent of the headset line, and buy the storage yourself instead of letting a reseller bundle it. Everything below is why those two numbers hold up.

Where 25 to 35 percent comes from

I pulled 31 purchase orders from January 2023 through December 2024 into our cost tracking spreadsheet. Headset spend totaled $412,000. Accessories and consumables totaled $131,000, or 31.8 percent. Of that, the genuinely mandatory portion — cases, face cushions, lens cloths — accounted for about 12 percent. The other 20 percent was money we saved on headsets and then spent somewhere else.

The clearest example is the Vive Pro 2. As of January 2025, HTC's own store lists the headset-only configuration around $799 and the full kit around $1,399 (verify current pricing at vive.com before you order, since promotions move these figures). We had 1.0 base stations and controllers left over from our 2021 Vive Pro setup, so on paper headset-only saved us $600 per unit. Four units, $2,400.

In practice, the Pro 2's tracking volume degrades at the edges of an 8-by-8-meter room when it is running older controllers. Two of our 1.0 base stations died during a firmware update. By month three we had ordered two 2.0 base stations at $199 each, and two engineers had each lost a day to reconfiguration.

Headset-only is the correct choice. It is only correct once you have priced the around-it.

Three places the money actually goes

1. Not all 256GB cards are the same 256GB

This is the storage question for the HTC Vive XR Elite headset, and it caught us flat. The XR Elite ships with 128GB internal and a microSD slot. Our original spec said, in full, add a 256GB card. Our purchasing coordinator picked the cheapest option on the approved vendor list — about $18 each in January 2025. Two of six kiosks started dropping frames after roughly 40 minutes of continuous use, with visibly slower scene loads.

The cards carried a UHS-I rating but no A2 application performance class. Sequential read looked fine on the datasheet. Sustained random read fell off a cliff under load. We swapped to A2-rated cards at about $32 each. Fourteen dollars per unit and the problem disappeared.

This matters more than people expect if your demo content is a card game or any app that streams assets off the SD card. In that setup, the card's random read speed is effectively your load speed ceiling — not the headset's processor, not the internal storage. If your content is a single fixed 360 video that never loads new scenes, though, this whole paragraph does not apply to you, and the cheap card is genuinely fine. I would rather say that plainly than sell everyone on premium media.

2. Headset-only requires three confirmations, not one

When we bought the Vive Pro 2 headset only, we confirmed exactly one thing: that the base stations were SteamVR-compatible. We should have confirmed three.

  • Generation and firmware version of every existing tracker and controller, checked against a physical device list rather than a sales rep's assurance.
  • Tracking volume geometry at your actual room size, not the spec sheet's ideal case. Our rooms are 8 by 8 meters; the demo bays are smaller and behave differently.
  • Who owns the update risk if old and new hardware share a firmware path.

None of those three checks takes more than a few minutes. All three would have prevented the $1,100. In my first year of hardware procurement I made the classic specification error of assuming standard means the same thing to every vendor. Cost me a $600 redo then. Apparently I needed a second lesson.

3. Cases, cushions, and the questions nobody routes to you

Six XR Elite headsets, and our initial plan was to share three storage cases. That lasted two weeks. One scratched lens, one complaint about shared face cushions, and we moved to one case per unit. The official cases run about $59 each; six came to $354. Least regrettable line item of Q2 2024.

Travel is messier. Our demo kit flies roughly 30 times a year, and the team asks me a rotating set of questions that are only tangentially mine. Last week: can you use wireless headphones on a plane. Yes — the FAA permits portable electronic devices through all phases of flight, but individual airlines set their own rules and plenty still require headphones off during taxi, takeoff, and landing. Bluetooth occasionally interferes with older cabin systems. Check your carrier's policy before boarding rather than trusting a general rule.

The same week, two field staff asked whether a bike headset — specifically the bone-conduction kind — is legal to ride with. Audio-wise, most states allow a single earpiece or bone conduction because it does not seal the ear canal. It is not a helmet substitute, and helmet-mounted comms units are regulated differently by jurisdiction. Check local vehicle code before buying.

Neither question has anything to do with VR procurement. Both explain the same phenomenon: the hard part of a hardware budget is not the big line items. It is the small ones nobody reviews. Low unit price, fast decision, no second signature. Thirty of those and you have your 20 percent.

The checklist I actually use now

After the 2023 mess I built a 12-item pre-purchase check, weighted toward three categories: compatibility with existing ecosystem hardware, storage and card performance class, and a separately tracked accessory and consumable budget. It sounds basic. It has run across 19 orders with two minor reworks. The 12 orders before it produced five.

Five minutes of verification beats five days of correction. I said that in a department meeting once and got laughed at. They all use the spreadsheet now.

When this advice does not hold

If you are buying one or two units for a conference room, budget accessories at 15 percent or skip the case entirely — a locked cabinet works. If you are renting for a fixed project window, buy no accessories at all, because the rental house typically covers them.

And if you already run a complete SteamVR 2.0 ecosystem with current firmware, headset-only is unambiguously the right call and none of my $1,100 applies to you. The condition is that you actually verified it — with a device list and firmware versions in front of you, not with a verbal confirmation. We did not verify. That was the whole cost.